How To Adjust Motorcycle Valves. How To Adjust Shim-Type Motorcycle Valve Clearances - MC GARAGE. To adjust the yoke and valves on these engines bar engine in normal rotation direction until the TC mark on the damper with the No.
A good symptom of too tight valves are hard to start when hot and generally poor performance when hot. This really is important so leave your bike to cool overnight before starting work on it. Use a wrench to loosen the locknut and tighten or loosen to the tappet clearance screw if the clearance is out of spec.
Retighten the screw and locknut and measure again.
Now in the manual its says its 101 Ratio i did a compression test before i started the bike. To adjust it you must have a shim kit and adjust the shims to get the right height under the bucket. How to adjust the valves on a motorcycle Works on most motorcycles and mopeds. Too loose valves will tap loudly.
